about

Request a Sample

[email protected]

Frequently

Asked Questions
  1. Q1: Can I have a sample for testing?
    A: Yes, you can, but you need to pay.
  2. Q2: Can I add my logo on the clothing?
    A: Yes, OEM and ODM are available.
  3. Q3: Do you have inspection procedures for the products?
    A: 100% self-inspection before packing.
  4. Q4: Can I have a visit to your factory before the order?
    A: Sure, your visit is welcome at any time.
  5. Q5: How can I get after-service?
    A: We assure 2 years warranty. During this period, If any product quality issues occur, spare parts will be sent for free. But we have to charge if the problem is caused by man-made factors.

How often should a harness be inspected

Code of practice for selection, use and maintenance of personal fall ...

Mar 13, 2011 ... Committee PH/5, Industrial safety belts and harnesses, upon which the following bodies ... Inspection, care and maintenance of equipment. 94. 14 ... Figure 5 Situation in which a restraint system should not be used because .... Figure 52 Danger of a swing fall when using a retractable type fall arrester.

eLCOSH : How to Select a Full-Body Harness

Many manufacturers rely on universal sizing, which means a harness should fit the .... When inspecting your harness, a good rule of thumb is: Any doubts, toss it.

OSHA & ANSI Inspections Fall Protection Systems

Jul 20, 2016 ... OSHA & ANSI Inspections have different regulations. ... year (or more frequently if required by the manufacturer's instructions) by a competent person ... personal fall arrest systems must be regularly inspected for the following:.

Fall Protection Maintenance Guideline Harness Land

Harness Land is the source for supplying your guardian safety harnesses ... DBI/SALA product can be used as long as the inspection performed does not reveal any ... The activation date is defined as the time when a product is first put into...

How often should you perform fall protection equipment inspection ...

Apr 19, 2013 ... It includes the security harness and related components such as anchor ... When in doubt, the unsound equipment must be reported to the...

Harness Inspection Guidelines - OSHA

may not show up through a sight (visual) inspection only - manual (touch) the ... Every harness must have a legible tag identifying the harness, model, date of.

News - Petzl How to inspect your climbing harness - Petzl United ...

Jan 24, 2018 ... When was the last time you inspected your climbing harness? ... If your harness is showing unexpected degradation, it should be quarantined...

Inspections - Skylotec

The inspection should be carried out according to the manufacturer's ... Harnesses and ropes made of chemical fibres are subject to a certain ageing effect even if ... can lead to the equipment becoming brittle even when it is not being used.

Fall Protection PPE: When Do You Need To Replace A Safety ...

Apr 6, 2012 ... This often happens when workers do not report the falls, fearing they may be ... Workers should inspect their safety harnesses before each use,...

How to Make Your Personal Fall Protection Equipment OSHA ...

Jan 17, 2018 ... Did you know Fall Protection is the most frequently cited OSHA ... Fall protection and fall rescue equipment shall be inspected on a ... Not only can they determine when a harness, lanyard, or retractable device should be...

Health and Safety Equipment Inspection - Aspiring Safety

In the case of harnesses a minimum strength of 15 kN (approximately 1500 kg) ... the manufacturer's rating are of course only applicable to the equipment when it is new. ... A register should be kept so that the inspections can be recorded, and...

Safety at Height Services - HBE Ireland

Safety at height equipment must be annually maintained & certified by a ... Personal Fall Prevention Equipment (PFPE)/ safety harness kits inspected and...

Do fall arrest equipment have an EXPIRY DATE Terry Penney ...

Oct 3, 2015 ... 1 It must be check and inspected yearly by an agency plus ... end-user to determine when a harness or lanyard is unfit for use and should be...

Harness System Inspection Procedures - UltraSafeUSA

Jun 2, 2017 ... Harnesses with unusually enlarged or distorted holes should fail ... which is similar to the twisting we often see in a telephone handset cord.

Inspecting fall arrest equipment made from webbing or rope - HSE

can also be applied to non-energy-absorbing lanyards and safety harnesses used for the same purpose. ... to result in dangerous situations should be inspected at suitable intervals and each ... recommend inspection more frequently than this.

Fall Protection Inspection Maintenance free online course

Frequent inspection by a competent person should also be accomplished. Replace any ... Use that harness to tell the story in training about how it saved a life.

Fall Protection Harness Inspection Gravitec Systems Inc.

All fall protection wears out and must be inspected before each use by the authorized person. Many accidents and fatalities have occurred because...

Your Safety Harness Has an Expiration Date! ice4safety

Full-body safety harnesses are a highly effective and reliable piece of any fall protection plan but, while you may frequently inspect and maintain your safety...

Safety harness and lanyard inspection service - Simplex

Just like your connection accessories, your harness must be inspected. ... When your safety equipment is inspected, you may pick it up the same day or at a later...

Body Belts, Harnesses, and Lanyards : OSH Answers

How do you inspect the webbing (body of belt, harness or lanyard)? ... of fall arrest equipment should be inspected and certified at least yearly or more often by a...

Safety Talk - Fall Protection Equipment Approvals and Inspection

[This talk should include hands-on inspection of equipment.] When exposed to the risk of falling, your fall protection system may be all that keeps ... Safety harnesses or belts should be approved by the Canadian Standards Association (CSA).

How to inspect and maintain personal fall arrest systems 2014-10 ...

Oct 2, 2014 ... To inspect your harness or body belt, perform the following procedures. ... Keeper locks must prevent the keeper from opening when the keeper...

PPE Focus of the Month: Harnesses and Lanyards For Fall Protection

when inspecting their harnesses and lanyards? ... have trained them in OSHA fall protection standards and practices does not mean that they fully understand.

The Top 5 Most-Commonly Asked Questions about Fall Protection ...

Sep 12, 2014 ... Environmental conditions also dictate when a specialty harness may be .... Ideally, the user should evaluate product options and inspection...

Safety Inspection: Fall Arrest Harness Inspection AXIS Inspection ...

Jan 26, 2016 ... When working at heights, which in Manitoba, is 3 meters (10 feet) (Workplace Safety & Health Regulation Part 14.1) an individual must have a...

Importance of Fall Protection Inspection and Recertification Safesite

Oct 26, 2016 ... When it comes to a boiler or a car, we all understand the importance of regular ... (fixed length if the system is fall restraint) and a fully body harness. ... Inspection and rectification of equipment must only be carried out by a...

How Often Does Your Gear Need To Be Inspected?

May 11, 2017 ... And at least once a year (or more frequently if required by the ... Inspection form Harness.jpg Inspection form Lanyard.jpg Inspection form SRL.